Video Instructions: Removing & Replacing the M1 Tank Cover
Step 1. Place handle into the most forward position near the Forward Riser Pulley.
Step 2. Remove the rest bolts.
Step 3. Pivot back the footboard.
Step 4. Remove the cover from the rower to expose the top deck.
Position the handle forward to the front Forward Riser pulley Carefully remove the Top Deck by removing the Top Deck bolts and upper Tie Rods. Gently lift the Top Deck up...
Step 1. Remove the Handle from the handle rests and place the handle in the full forward position Step 2. Remove the handle rest bolts and handle rests as shown....
The Level Gauge sticker on all Series 4 (S4) model WaterRower units, is located on the side of the tank under the tank stopper. The Level Gauge sticker on the...
Step 1- Remove the Handle from the handle rests and place the handle in the full forward position. Step 2- Stand the WaterRower upright and disconnect the bungee from the...