M1 Monitor Service Instructions

M1: Monitor Board Replacement

  • May 22, 2017 // Modified 7 years ago

Step 1- Remove screws (2) fastening the battery cover at the rear of the monitor as shown.

Step 2– Remove the Battery Cover as shown.

Step 3- Remove the Battery as shown

Step 4- Remove screws (4) fastening the Monitor Board Assembly to the housing as shown.

 

Step 5- Remove Monitor Board Assembly as shown.

 

Step 6- Remove the Sensor Wiring Connector as shown.

Step 7- Replace Monitor Board as shown. Be care to ensure that yoyu place the Sensor Wiring Connector correctly. The connector should be oriented so that the red wire is toward the outside edge of the board.

Step 8- Replace Monitor Board assembly as shown.

 

Step 9- Replace screws (4) fastening the Monitor Board Assembly to the Monitor Housing as shown.

Step 10- Replace Batteries as shown.

 

Step 11- Replace the Battery Cover as shown.

 

Step 12– Replace the screws (2) fastening the battery cover at the rear of the monitor as shown.

Related Articles

  • M1: Recoil Belt Buckle Replacement

    Step 1- Pass the Recoil Belt through the bungee buckle with the belt facing the serrations on the buckle as shown.   Step 2- Pass the Recoil Belt through the...

  • M1: Footboard Replacement

    Step 1.  Remove the Handle from the handle rests and place the handle in the full forward position Step 2.  Remove the handle rest bolts and handle rests as shown....

  • M1: Monitor Wire Assembly Replacement

    Position the handle forward to the front Forward Riser pulley Carefully remove the Top Deck by removing the Top Deck bolts and upper Tie Rods. Gently lift the Top Deck...

  • M1: Monitor Sensor Replacement

    For Video Instructions, click here: S4 Monitor Sensor Replacement Step 1- Remove the handle from the handle rests and place the handle in the full forward position as shown.  ...