Step 1- Remove the handle from the handle rests and place the handle in the full forward position.
Step 2- Disconnect the bungee as shown.
Step 3- Remove the bungee from the rear spacer and reattach the replacement bungee as shown.
Step 4- Connect the bungee to the recoil belt as shown.
Position the handle forward to the front Forward Riser pulley Carefully remove the Top Deck by removing the Top Deck bolts and upper Tie Rods. Gently lift the Top Deck up...
Video Instructions: Removing & Replacing the M1 Tank Cover Step 1. Place handle into the most forward position near the Forward Riser Pulley. Step 2. Remove the rest bolts. Step...
Position the handle forward to the front Forward Riser pulley Carefully remove the Top Deck by removing the Top Deck bolts and upper Tie Rods. Gently lift the Top Deck...
Sensor Disk Replacement: View a video for this Step 1– Remove the Handle from the handle rests and place the handle in the full forward position as shown. Step 2- Stand the...