M1 Monitor Service Instructions

M1: Monitor Battery Replacement

  • May 22, 2017 // Modified 7 years ago

Step 1- Remove screws (2) fastening the Battery Cover at the rear of the monitor as shown.

Step 2– Remove the Battery Cover as shown.

Step 3- Remove the Batteries as shown.

Step 4– Replace the Batteries as shown.

Step 5- Replace the Battery Cover as shown

Step 6- Replace the screws (2) fastening the Battery Cover at the rear of the monitor as shown.

Related Articles

  • M1: Top Deck Replacement

    For Video Instructions, click here: Removing the Top Deck   Step 1- Remove the handle from the handle rests and place the handle in the full forward position as shown....

  • M1: Monitor Sensor Disk Replacement

    Sensor Disk Replacement: View a video for this Step 1– Remove the Handle from the handle rests and place the handle in the full forward position as shown.   Step 2- Stand the...

  • M1: Level Gauge Location

    The Level Gauge sticker on all Series 4 (S4) model WaterRower units, is located on the side of the tank under the tank stopper. The Level Gauge sticker on the...

  • M1: Recoil Bushing Replacement

    Handle Removal Step 1- Remove the handle from the Handle rests and place the Handle in the full forward position.   Step 2- Stand the WaterRower upright and disconnect the...